Panel Guide

Menvier M-Series – RS232

Panel Connection – RS232

Manufacturer	Eaton
Model	Scantronic/Menvier M-Series
Version	M1000 and M2000
Minimum Panel Firmware	MIN V1:01
Cable required?	Menvier-M-RS232
Panel Profile	MENVIER-M-RS232
Panel Bus Connection	Unterminated serial cable with 9 Way D-Type IDC socket

Go to Engineer Level 2
Option 5 Communications
Option 2 Digicom
Option 1 Comms Format
Set to Option 7 – Extended SIA level 3
Option 2 ARC No 1
Set telephone number to <01666111>
Back to Digicoms option 2
Option 3 for account numbers
Enter the Account Number 1 <_______>
Option 4 Dialling mode Should be set to – Consecutive –
Option 5, Options
Option 1 Restore signals select
Option 2 Fast Format <8FF Channels>
Back to Digicoms Option 2
Option 6 CID/SIA reports set to [Full]
Back to Engineer Level 2
Option 5 Communications
In Option 4 RS232 options
Ensure Option 1 – Select RS232 baud <38400>
And Option 2 – Select Remote Modem
Back to Go to Engineer Level 2
Option 5 Communications
Select Option 1 downloader
Enter Option 1 and Select Password <______> (same as configured in downloader application)
Communications Option 5
Select Option 1 – Downloader
Set Option 3, Select access mode to – Unattended –
Set Option 4, Edit call No 1 to – BLANK
Option 5 Modem Options ensure
Option 1 – Select rings to answer Option 1 is – Immediate
Option 2 – Select baud rate – 1200 – (2400 if available)