Panel Guide

Aritech Advisor Master – Dial Capture

Panel Connection – Dial Capture

Manufacturer

Carrier

Model

ATS

Version

Advisor Master

Minimum Panel Firmware

04.09.24

Cable required?

MCM connected to:

  • DualCom Pro 1 – MCM plug-on module CS.1.402
  • DualCom Pro 2 – DI & AL

Panel Profile

ARITECH-MASTER-MCM

Panel Bus Connection

Dial Capture

Panel Connection Information

DualCom Pro 1 – MCM plug-on module – Line A
DualCom Pro 2 – DI

PSTN A

DualCom Pro 1 – MCM plug-on module – Line B
DualCom Pro 2 – AL

PSTN B

Panel Programming

  • Enter User code
  • Go to Menu 7 and enable service mode
  • Enter Engineer mode
  • Go to menu 17 and enable service In
  • Go to menu 19 Select advanced service menu
  • Go to Menu 9 Communication options
  • Ensure PBX is BLANK
  • Ensure MSN is BLANK
  • Select dial tone detection (UK)
  • Select DTMF tone dialling (YES)
  • Select enable PSTN line fault monitor (NO)
  • Select Monitor Service tones (NO)
  • Select 3-digit SIA extensions (YES)
  • Select ISDN point to point (NO)
  • Select 200 baud reverse area open/close (NO)
  • Select X25 TEI value <2>
  • Select Audio listen in time <180>
  • Select Audio listen in time frame <30>
  • Select Report mains fault (YES)
  • Select Report line fault (YES)
  • Select Enable GSM line fault monitor (NO)
  • Select the central station to program (Central station1)
  • Select the reporting format (Option 7)
  • Enter the first phone number <01234 567890>
  • Enter the first phone number 2
  • Enter the system account number <_____>
  • Select BELL modem tones for SIA (YES)
  • Enter the Area account number <_____>
  • Select Dual reporting (NO)
  • Select listen in (NO)
  • Select Disable reporting inhibits (NO)
  • Select reserved (NO)
  • Select X_SIA Max Characters <30>
  • Select X25 account code (Not Set)
  • Select X25 line type <0>
  • Select connection type 0 (PSTN)
  • Suppress FTC for voice reporting (NO)
  • Retry Count (10)

 

UDL/Remote Management Programming

  • Go to menu 29
  • Select enable remote up/download (YES)
  • Select up/download if any area armed (YES)
  • Select Enable remote control (YES)
  • Select Remote control if any area armed (YES)
  • Select use modem init string (NO)
  • Select Report alarms to computer (NO)
  • Select Report access events to computer (NO)
  • Enter security password <0000000000> (Ten zeros)
  • Select Security attempts <255>
  • Select Number of rings before answering <1>
  • Select Number of calls before answering <0>
  • Select Answer machine defeat (NO)
  • Select Reserved (NO)