Accessories

The Plug-in Power Supply Unit (PSU) for the CSL Router.

The Plug-in PSU for the CSL Router 12V DC is supplied with interchangeable AC heads for the UK, Europe, the USA and Australia.

Weight: 250g

Dimensions (max): 79.1 (L) 4G.2 (W) 37.1 (H)

2 metre black cable to be used with the CSL Router.

Plug (with CSL Router connector) at one end and bare ends on the other to connect to a panel.

High Performance Aerial with SMA Connector and MMCX Converter.

The Aerial is used when the signal strength is not sufficient.

It is a probe-style aerial, 30cm long with a 5m lead.

High Performance Aerial with SMA Connector and MMCX Converter.

The Aerial is used when the signal strength is not sufficient.

It is a probe-style aerial, 30cm long with a 15m lead.

5M Extension Cable with SMA connectors (Black).

Black Aerial Extension Lead with SMA Connectors (5M).

5 metre extension cable with MMCX Connector (White).

For the upgrade of any existing aerial cables to a Single 4G High Gain Aerial Ext/Int for the DualCom Pro Range.

The necessary aerial for the DigiAir Pro variant of the DualCom Pro Range. Allows for 4G radio connectivity.

The single version of the DualCom Pro Range High Gain Aerial.

Allows 4G radio connectivity for the GradeShift IP/Radio variant.

2 Aerials can be used at the same time for GradeShift Radio/Radio.

The lead length is 1.5 metres.

Serial connection for SIA and UDL.

Required for use with: (Pyronix) 280 & 46 (Honeywell) Flex/Flex+, 20, 50, 100, Dimension, G3, G2 & Classic (Orisec) CP-10, CP-20, CP-25, CP-30, W-CP-40, CP-100, CP-200 (Texecom) 12, 24, 48, 60, 88, 168, 640, 816.

Serial connection for SIA and UDL.

Required for use with: (RISCO) LightSYS, LightSYS II, Agility II.

Serial connection for SIA and UDL.

Required for use with Cooper TS panel.

Serial connection for SIA and UDL.

Required for use with the HKC panel range.

Serial connection for SIA and UDL.

Required for use with Guardall QX, 18i, 34, 32i, 34i, RX18, 34, 80, 250 HS & 500.

Serial connection for alarms and UDL.

MMCX Connector for Eaton and Pyronix Panel.

Plug-on adapter for DualCom Pro.

To be used where a customer has an old Scantronic alarm panel with 16 plug-on pins and no generic comms output terminals.

3 metre, category 5 Ethernet cable with booted RJ45 plugs.

Plug-on board to add 16 extra pins to DualCom Pro devices. Compatible with all DualCom Pro range variants.

This board needs to be fitted to the main module of the DualCom Pro.

For any GradeShift Pro Radio/Radio installations, the secondary radio module will need to be removed and placed into a Radio/Wi-Fi Module Enclosure (CS.1.500).

Provides connectivity between your DualCom Pro Communicator and the ION’s serial bus. The solution supports encrypted transmission of SIA protocol events from the panel.

Adaptor for use when connecting a CSL Router, MiniAir, Signal Analyser or older WebWay product (with SMA connector) to a standard CSL MMCX aerial.

Adaptor for use where there is an existing aerial with a male SMA connector on site and you want to plug it into a DualCom Pro or DigiAir device.

CSL Signal Analyser 2 is a professional mobile network signal testing tool designed for multi-sector applications, including security systems, utilities, healthcare technology, and smart infrastructure projects.

It accurately identifies the strongest available cellular network to ensure optimal device placement, reliable connectivity, and improved signal performance.

The CS0450 conversion lead is for CSL Connected with the Risco product. It enables conversion from a UFL to an MMCX connector, allowing an aerial to be connected.

The MiniAir Aerial Extension Lead is for use with the DualCom MiniAir. In the unlikely event that the signal received by the MiniAir is insufficient, the MiniAir Aerial Extension Lead allows relocation of the aerial up to 2 metres. If a longer distance is required, it is possible to use 2 MiniAir Aerial Extension Leads on the same installation. Increasing the distance beyond this will cause a significant drop in signal strength.