LED Colour Status Guide – DualCom Pro Range

This section provides an overview of the LED Colour Status for all products in the DualCom Pro Range; DigiAir Pro and GradeShift Pro. For information about those specific products, troubleshooting and LED Colour Status at different stages (Site Survey, Installation, Commissioning & Testing), please refer to the Quick Guides in Support.

A DualCom Pro operating normally will only have LED 3 lit: 

LED 3
	Red solid = Error found on the device (no commissioning performed)
	Amber flashing = Only one path is working on the dual-path system and the device is currently transmitting or receiving data (pdp context active)
	Amber solid = Only one path is working on the dual-path system, however it is able to transmit & receive data
	Green flashing = No errors found and the device is currently transmitting or receiving data (pdp context active)
	Green solid = No major errors found

To quickly check the current connectivity status of each path, press the A button: 

LED 1 – Path 1			LED 2 – Path 2 (where fitted)
	Red flashing = No signal / SIM not ready or LAN not connected		Red flashing = No signal / SIM not ready or LAN not connected
	Amber flashing = Registering / Signal is unacceptable / LAN connected but cannot transmit data		Amber flashing = Registering / Signal is unacceptable / LAN connected but cannot transmit data
	Green flashing = Signal is acceptable (3/10) but could be improved		Green flashing = Signal is acceptable (3/10) but could be improved
	Green Solid = Signal 4/10 (or above) or LAN connected		Green Solid = Signal 4/10 (or above) or LAN connected