Panel Guide

Interlogix Networx – Dial Capture

Panel Connection – Dial Capture

Manufacturer	Carrier – Interlogix
Model	Networx
Cable required?	MCM connected to: DualCom Pro 1 – MCM plug-on module CS.1.402 DualCom Pro 2 – DI & AL
Panel Profile	INTERLOGIX-NETWORK-MCM
Panel Bus Connection	Dial Capture

DualCom Pro 1 – MCM plug-on module – Line A DualCom Pro 2 – DI	PSTN Line T
DualCom Pro 1 – MCM plug-on module – Line B DualCom Pro 2 – AL	PSTN Line R

To access the panel for configuring, press keypad keys *8 then Installer code

Press 4 then # to select Phone Number One

Keypad will display [Loc# .0 Seg# 1].
Input the telephone number 0123456789 by pressing one digit and the * for each of the numbers in the telephone number then press #
Keypad will display [Enter the feature no., then #]

Press 5 then # to select System Account Code

Keypad will display [Loc#. 1 Seg# 1].
Input the account number by pressing one digit and the * for each of the numbers in the account number then press #
Keypad will display [Enter the feature no., then #]

Press 6 then # to select Communicator Format

Note: Clear settingvalue for all other Telephone Number features

Press 12 then # to select Download Access Code

Keypad will display [Loc. 19 Seg# 1].
Make a record of or input the download access code that must match what is entered or stored in the DL900 configuration (UDL) program.
Keypad will display [Enter the feature no., then #]

Press 13 then # to select Number of Rings/Number of Calls to Answer

Press 14 then # to select Download Control