HKC SecureWave 1070 V1 & V2 – TTL

Panel Connection

Enter “Engineer” mode
Make sure SP1 on the HKC panel is set up for Remote PC
Enter “Communications” menu
Communications Options Menu
SP1 Port Options
Set “Remote Access” to “Secure Access”
Set “Local Access”
Set “Printer Port”
Make sure SP1 baud is set to 2400
Data bits 8
Stop bit 1
NO PARITY (default)
Go to “Communications” menu
“Communication Service” menu
“Port Settings”
“Communications Service” menu
To change remote user code from default
Enter “Communications” menu
Select “Remote User” menu
Select “Remote User Code”
RO1 Remote user will be displayed, set and verify this as 1234 or as required
Notify CSL of the new code or set this using menu K on the DualCom Pro Communicator