Automatic switching, built into the SIM
rSIM® tests the active data connection at configurable intervals. When a sustained failure meets the configured switching policy, it selects the alternative network profile so the device can reconnect through a separate operator core.
The switching decision happens on the SIM itself. It does not need a command from a remote platform or failover logic built into the device’s firmware. Recovery depends on a usable alternative connection being available.
Voice connectivity alongside data
A lone worker device may need to send an alert, share location information and establish a voice call with an Alarm Receiving Centre (ARC). Successful data connectivity alone does not confirm that voice calling will work across the same networks.
CSL offers multi-network VoLTE connectivity for lone worker applications. VoLTE, or Voice over LTE, carries voice calls over 4G. The device, SIM profile and roaming arrangements need to support the required voice service together.
For deployments using rSIM, voice support should cover both profiles. Following a switch, the device can establish a new call on the alternative profile where VoLTE is supported and provisioned.
Connectivity that fits your device
Lone worker pendants and wearables often have limited space, a single SIM slot and a fixed battery budget. rSIM brings two independent operator profiles together on one SIM, providing additional connectivity resilience without requiring a second SIM slot or device-side switching logic.
Integration is usually handled through device configuration, with compatibility validated for each product type before rollout. CSL offers a range of SIM form factors to support different device requirements, including standard, micro and nano SIM options. This provides a practical route to assessing additional resilience across both new devices and existing estates.
Resilience with battery life in mind
For a lone worker pendant or wearable, connectivity needs to support both reliable communication and the required operating time between charges. Reporting frequency and the modem’s power-saving behaviour influence that balance, so battery performance should be assessed using the device’s intended configuration and working conditions.
Visibility into switching and recovery
Connectivity records help service providers understand how their devices respond during a network incident. rSIM switching records can provide an audit trail of detection, switching and recovery times.
These records can be considered alongside ARC event logs to build a clearer picture of connectivity recovery and alarm handling. For services operating in accordance with BS 8484, this information can also contribute to supporting evidence for service reviews and incident investigations.

Frequently Asked Questions
What makes a SIM suitable for a lone worker device?
The right SIM needs to support the device’s coverage, data and voice requirements. Where additional resilience is needed, independent operator cores and automatic switching provide an alternative to relying on one core network. Compatibility should be validated for the device before deployment.