| Dimensions | 90mm (h) x 142mm (w) x 22mm (d) |
| Weight | 189g excluding aerial |
| Temperature | -10 °C to + 55 °C |
| Humidity | 0 - 90% non-condensing |
| Mounting |
Via fixing points under main cover |
| Warranty | 5 years |
| Power Requirement |
10 - 36 Volts DC In order to maintain compliance with requirements for electrical safety the Dualcom Pro should always be powered from a fused supply with following rating:
If the power source is not limited to these values, then a fuse with the correct rating must be fitted in line with the positive connection from the power source. |
| Current Consumption |
DigiAir Pro 2 Radio 12V Power Supply: 103 mA (average value) DigiAir Pro 2 Radio 24V Power Supply: 59 mA (average value) DigiAir Pro 2 LAN 12V Power Supply: 96 mA (average value) DigiAir Pro 2 LAN 24V Power Supply: 55 mA (average value) GradeShift Pro 2 LAN Radio 12V Power Supply: 100 mA (average value) GradeShift Pro 2 LAN Radio 24V Power Supply: 63 mA (average value) GradeShift Pro 2 Dual Radio 12V Power Supply: 120 mA (average value) GradeShift Pro 2 Dual Radio 24V Power Supply: 72 mA (average value) |
| Radio Path | 2G, 3G, 4G |
| Output Ratings | Maximum applied voltage = 60VMaximum current = 150mA |
| Aerial | 50 ohms (nominal) on MMCX socket |
| Operation Method | Store and forward |
| CIE Interconnections | Input triggering (standardised parallel), RS232, RS485, TTL |
| RCT Protocols | SIA |
| Input Terminals | Max +30 Volts, Min 0 Volts DC (reference supply 0V) with a + or – 40% change for > 200ms. |
| Low Battery | 7.6V DC +/- 0.5 VDC |
| User Serviceable Parts | There are no serviceable parts within the DualCom Pro Range |
| Applicable Standards |
Suitable for use in alarm systems complying to:
Emissions Standard – Radio Equipment Directive 2014/53/EU (RED) EN 50130-5 Environmental Class II ATS Configuration EN 50131-10:2014 Type Y ATS Classification EN 50136-1-1:1998
|