Panel Connection - Dial Capture

Manufacturer Eaton
Model Scantronic 9X5X
Version MCM version less or equal to V1.05 - Needs SPT version less or equal to V2.06 MCM version greater or equal to V1.06 - Needs SPTversion greater or equal to V2.07
Minimum Panel Firmware N/A
Cable required? Standard alarm cable
Panel Profile Scantronic-9X5X-MCM
Panel Bus Connection None
Technical Notes

Input 51 to submit Date/Time changes


Panel Connection Information

SPT Panel
MCM plug-on-module - Line A (DI for Pro 2) PSTN Line A
MCM plug-on-module - Line B (AL for Pro 2) PSTN Line B

Panel Programming

  • Enter Engineer Mode
  • Input 101, press (Enter)
  • [101: Comms] will be displayed, press 1 (Single) & (Enter)
  • Input 103, press (Enter)
  • [103: Format] will be displayed, press 5 (Extended SIA 3) & (Enter)
  • Input 112, press (Enter)
  • [112: Rings To Ans] will be displayed, press 0 (Any) & (Enter)
  • Input 114, press (Enter)
  • [114: Call Back] will be displayed, press 2 (Any) & (Enter)
  • [115: Tel No 1] will be displayed, press (Enter) and input telephone number<01234 567890> & (Enter)
  • Input 117, press (Enter)
  • [117: Account No] will be displayed, press (Enter) and input account number and press (Enter)
  • Input 131, press (Enter)
  • [131: Mode] will be displayed, press 3 (Full) & (Enter)
  • Select test calls (No)
  • Exit “Engineer” mode into “Day” mode

Remote Access Programming

  • Go to “Set Up Downloading”
  • Select “Download” by (WebWayOne)
  • Select “Poll Timeout” <10>
  • Select “Modem Init Timeout” <060>
  • Select “Rings To Answer” <1>
  • Select “Comm. Tx Timeout” <030>
  • Select “Program PCs” <1>
  • Select “Signal Alarms” (No)
  • Select “Signal Faults” (No)
  • Select “Signal Set/Unset” (No)
  • Select “Signal Access Code” (No)
  • Select “Password” (optional UDL password)
  • Select “Redials” <03>