Why CSL
IoT Solutions
- IoT Overview
  
  All Our Solutions in One Place
- SIMs
  
  Managed 5G & 4G Roaming IoT SIMs
- Routers
  
  Instant 4G Connectivity for Any IoT Application
- VoiceLink
  
  PSTN to 4G VoLTE Converter for Voice Calls
- CSL Satellite
  
  Global, Secure IoT Connectivity
- Broadband
  
  Secure & Reliable Fixed Broadband Offerings
- Alarm Signalling
  
  Security & Fire Alarm Solutions
Resources
- Installer Zone
  
  Product Guides, Install Videos, FAQs and More
- Blog
  
  IoT Experts Discuss the Latest Challenges
- Case Studies
  
  Discover How We Help Businesses like Yours
- CSL Live
  
  Our Device Management Portal
- My Base App 2.0
  
  Our Handy Installer App
- All IP
  
  How Does the PSTN Switch-Off Impact You?
- ECHO
  
  The Fully-Automated, Electronic Alarm Transmission Service
Company
- Our Story
  
  30 Years of Critical Connectivity
- Experts in IoT
  
  Meet Our Leadership Team
- Sustainability
  
  Our Commitment to the Future
- Careers
  
  Interested in Joining Our Team?
- News
  
  The Latest News, Information and Updates
Contact Us

DualCom Pro Range

Download Manual Download Chapter

Technical Specifications

ENSURE AERIAL/AERIALS ARE INSERTED INTO THE MMCX CONNECTOR WITH THE RED DOT.

Figure 1 - Diagram

Figure 2 - LAN Adaptor

To enable the device to use LAN, you will need to connect the LAN adaptor (above) to the LAN Connector (on the DualCom Pro).

Dimensions	75 mm (h) x 119mm (w) x 15mm (d) or 75mm (h) x 119mm (w) x 32mm (d) with secondary radio module
Weight	113g excluding aerial
Temperature	-10 °C to + 55 °C
Humidity	0 - 90% non-condensing
Mounting	Via fixing points under main cover
Warranty	5 years
Power Requirement	10 - 36 Volts DC In order to maintain compliance with requirements for electrical safety the Dualcom Pro should always be powered from a fused supply with following rating: For a 12v DC system (supply voltage in the range 10vdc to 14vdc) a fuse rated at 1.25 For a 24v DC system (supply voltage in the range 20vdc to 36vdc) a fuse rated at 600 mA If the power source is not limited to these values, then a fuse with the correct rating must be fitted in line with the positive connection from the power source.
Current Consumption	DigiAir Pro = 35mA (Avg. Value) GradeShift Pro - LAN/Radio = 40mA (Avg. Value) GradeShift Pro - Radio/Radio = 175mA (Avg. Value)
Radio Path	2G, 3G, 4G
Aerial	50 ohm (nominal) on MMCX socket
Operation Method	Store and forward
Input Terminals	Max +30v, Min 0 volts DC (reference supply 0v supply) 100k Low Battery 7.6V DC +/- 0.5 VDC
RCT Protocols	SIA
User Serviceable Parts	There are no serviceable parts within the DualCom Pro Range
Environmental	Class II
Applicable Standards	Suitable for use in alarm systems complying to: EN50131-1:2006+A2:2017 EN50131-10:2014 Type Y EN50136-1:2012+A1:2018 SP1,SP2,SP3,SP4,DP1,DP2,DP3,DP4 EN50130-5 Emissions Standard – 2014/53/EU (RED) PD6662:2017 / PD6669:2017 ATS Classification: EN50136 ATS5/DP4 Max ATS 5 parameters: D3/M3/T4/S2/I3/A3

DigiAir Pro

PATH	AVAILABLE GRADES	WHAT'S IN THE BOX	PART NUMBER
Radio	SP2	DigiAir Pro 2, serial cable & small aerial	CS.51.R2
LAN	SP2	DigiAir Pro, serial cable, Ethernet Cable & LAN connector adaptor	CS.51.L2
Wi-Fi	SP2	DigiAir Pro, serial cable, Ethernet Cable, Wi-Fi board & Wi-Fi module enclosure	CS.51.W2

GradeShift Pro

PATH	AVAILABLE GRADES	WHAT'S IN THE BOX	PART NUMBER
LAN + Radio	DP2 DP2+ DP3 DP4	GradeShift Pro, serial cable, single T-bar aerial, Ethernet Cable, & LAN connector adaptor	CS.53.LR2 CS.53.LR2P CS.53.LR3
Radio + Radio	DP2 DP2+ DP3	GradeShift Pro, secondary radio module, serial cable, Dual T-bar aerial	CS.53.RR2 CS.53.RR2P CS.53.RR3 CS.53.RR4