Panel Connection – MCM
| Manufacturer | Honeywell |
| Model | Galaxy 8, 16, and 16+ |
| Minimum Panel Firmware | 1.4 |
| Cable required? |
MCM connected to
|
| Panel Profile | Honeywell-Galaxy-MCM |
| Panel Connection | Dial Capture |
| Technical Notes |
DualCom Pro to Panel Wiring
| DualCom Pro 1 - MCM plug-on module - Line A DualCom Pro 2 - DI |
PSTN A |
| DualCom Pro 1 - MCM plug-on module - Line B DualCom Pro 2 - AL |
PSTN B |
Panel Config
- Enter Engineer Mode
- Go to Menu 12 Comms 1
- Menu 01 set Account/Site ID
- Menu 02 set Tel No.1 to a telephone number (Ex 01666111)
- Menu 03 clear Tel No.2
- Menu 04 set Format to SIA0
- Menu 06 set Dial Type to DTMF Dial
- Menu 07 set required Triggers
- Menu 10 set Access to Direct
- Go back to top menu structure
- Go to Menu 13 – Comms 2
- Menu 01 set No. of Rings to 1
- Exit Engineer Mode