Introduction
IP/GPRS GPRS/PSTN & IP/PSTN - For alarm control panels using up to 16 pins, RS232, RS485 and Dial Capture.
For compliance with EN alarm signalling Grade 2, 3, 4, BS 8418 for CCTV monitoring
Emizon TCD is the always on, Dual-path, Alarm and CCTV communications monitoring device for Broadband, GPRS and PSTN networks. This guide contains a step-by-step guide to the installation and commissioning of the TCD, the gateway to the Emizon IP service.
COMPATIBLE WITH THE FOLLOWING
| MAKE | MODEL |
| Bosch | Easy Series, Solution Series 16.64 |
| Castle | Euro |
| Cooper Menvier | Scantronic 95EN, Menvier M series (not T900), ION Range / Mevier 30, 40, 100 & 300, Menvier M series (not T900), ION Range / Menvier 30, 40, 100 & 300 |
| GE | ATS 200X/300X/400X, Aritech CD, ATS 200X/300X/400X Dial Capture, ATS 200X/300X/400X Dial Capture, ATS Advance Dial Capture |
| Guardall | All with RS232 Serial Port |
| Honeywell | Galaxy G2, Galaxy G3/Dimension, Galaxy (Dial Capture), Galaxy Flex 3 (Dial Capture), Galaxy G500, G512 and Flex 1 & 2, Galaxy Flex 3 RS485 |
| DSC | All |
| RISCO | Prosys, Agility Lightsys |
| Gardtec | 595 Series |
| Siemens | SPC Ethernet |
| Texecom | Premier, Premier Elite |
| HKC | SecureWave Range |
| Caddx | Nx,4,8,16 Dial-Capture, Via NX585/Serial Interface |
| GE Interlogic | Tecom System Challenger Version 8 |
| Inner Range | Concept 3000/4000 |
| Paradox | SP/MG (Dial Capture) |
| Satel | Integra (Dial Capture), Satel (Integra SIA over IP) |
| NOX | DC09 SIA over IP |
| Kentec Fire | Syncro / Solo |
| Orisec | CP Range |