Privacy Policy

Cookie Preferences

We use cookies and other tracking technologies to improve your browsing experience on our website, show you personalised content, and analyse our website traffic. Privacy Policy

Privacy Policy
Choose Language:

Signal Analyser

installer-zone-prod_signal.

Signal Analyser

Enquire Now

Identify the optimum location for your connected device prior to installation. 

CSL Signal Analyser is designed to relay accurate and essential data, to ensure the best position for your installation every time. It searches all the local base stations to give you an accurate reading of the major networks available, measuring and displaying radio technology, signal quality and radio signal strength. It provides information for 4G, 3G and 2G technologies and can also perform local Wi-Fi (2.4Ghz) surveys.

By connecting the aerial of your device to the Signal Analyser, you can utilise the live monitor function to find the optimum installation location. The Signal Analyser is ideal for installations of alarm signalling systems, 4G routers, parking meters/smart meters, Telecare products and many more applications. 

See links and information below for technical support, guides and installation videos.

Technical Specifications Quick Guide

Useful Links & Downloads

FAQs

Does the 4G Analyser work outside of the EU?

The radio module in the device is able to work worldwide and therefore the device is able to work in most countries, subject to local approval.

Did you find this answer useful? Yes or No

1 people did find this useful
0 people didn’t find this useful

Does the 4G Analyser work in the Republic of Ireland?

Yes, the 4G Signal Analyser works in Ireland.

Did you find this answer useful? Yes or No

1 people did find this useful
0 people didn’t find this useful

Is Wi-Fi included in all 4G Testers?

Yes, there is a 2.4GHz Wi-Fi chip included with the Signal Analyser to perform Wi-Fi Surveys or run Monitor Mode to view the available SSIDs, channels or MAC addresses and to ping an IP address to check response times.

Did you find this answer useful? Yes or No

2 people did find this useful
2 people didn’t find this useful

Do I need to use a SIM?

A SIM is not needed for surveys. It is only required when using Monitor Mode.

The SIM used must be at least the same RAT (i.e. 2G/3G/4G) that you are looking to monitor but should be a roaming SIM. Speak to CSL about purchasing one of these if you do not have one.

Did you find this answer useful? Yes or No

8 people did find this useful
0 people didn’t find this useful

Can I use my own SIM?

Yes, any SIM can be used as long as the pin code function has been removed.

If you wish to use a micro or nano SIM, the SIM carrier provided must be used to make it the required size and ensure it fits into the device correctly.

Did you find this answer useful? Yes or No

2 people did find this useful
0 people didn’t find this useful

I am running a survey but want to cancel?

While a survey is running you cannot cancel or complete any other actions, you must wait for the survey to complete or power off the device.

Did you find this answer useful? Yes or No

0 people did find this useful
0 people didn’t find this useful

What is the difference between Battery Saver and Auto Turn Off?

Battery Saver puts the radio module into sleep mode and dims the brightness of the screen to save battery power.

Auto Turn Off enables you to select a time, that if the unit is not in use, it will automatically power off to conserve battery power (as standard this is set to 5 minutes).

Did you find this answer useful? Yes or No

0 people did find this useful
0 people didn’t find this useful

Why can’t I see all the networks? (in Single Network or Monitor Mode)

If you can’t see your preferred network try refreshing the network. After this refresh the networks available in your location will be displayed. If you still can’t see your chosen network, it may be that it is not available in that area.

Did you find this answer useful? Yes or No

2 people did find this useful
0 people didn’t find this useful

What do the icons mean?

If you are unsure what the function of an icon is, you can use the Help Text function to display a description (press and hold the icon for 3 seconds).

Did you find this answer useful? Yes or No

0 people did find this useful
0 people didn’t find this useful

My device appears to be performing slower than it used to. What is the cause?

If your Signal Analyser is close to reaching the maximum number of saved files (240), it takes longer to process tasks. Delete old saved files to free up space.

Instructions can be found under the ‘DELETING SAVED FILES’ section in the Quick Guide.

To view the storage space, go to:
Settings > Device Information (it will be shown within the storage space bar).

Did you find this answer useful? Yes or No

3 people did find this useful
0 people didn’t find this useful

Why does the device take so long to boot up?

The boot up sequence ensures the radio module is ready to use. With newer versions of the product, this boot up time has been extended to incorporate the worldwide radio module being ready to start a survey.

Did you find this answer useful? Yes or No

1 people did find this useful
0 people didn’t find this useful